304 Stainless Steel 40 Microns Single Cartridge Water Pre-filter with 6000L/H-10000L/H Flow Rate
Basic Properties
Trading Properties
Product Summary
Product Details
304 Stainless Steel Water Pre-filter
,40 Microns Sediment Filter
,6000L/H-10000L/H Flow Rate Single Cartridge Filter
Product Description
- Bottom spring plate: Compression spring pushes cartridge upward continuously, preventing gaps even during pressure fluctuations
- Top lid groove: Molded groove captures and centers cartridge top, locking it securely in place
- Sandwich tension design: Spring pushes up, lid groove presses down - cartridge held rigid between two fixed points
- Single retaining ring: Snap ring (circlip) secures lid in housing neck groove - no bolts or clamp handles required
- Compact closure: Flush external profile with no protruding hardware to interfere with adjacent equipment
- Quick reassembly: Under 2 minutes with intuitive installation process
- Prevents side-slip: Lid groove captures cartridge ID, preventing lateral movement and bypass channels
- Smallest footprint: Ideal for tight skid layouts and crowded equipment rooms
- Lower parts cost: Standard stamped components reduce manufacturing costs while maintaining SS304/316L quality
Standard cartridge lengths: 5", 10", 20". All use 2.5" OD standard cartridges. Housing is sized accordingly - longer cartridges provide more surface area, longer service life, and higher flow capacity.
| Size | Application | Flow Rate |
|---|---|---|
| 5" | Point-of-use, small skids, lab applications | 1-3 m³/h |
| 10" | Point-of-use, small skids, lab applications | 3-5 m³/h |
| 20" | General industrial, medium flow applications | 6-10 m³/h |
Threaded (BSP/NPT): 1/2", 3/4" and 1" - most common for industrial piping applications.
Standard 2.5" OD cartridges compatible with all housing sizes.
- Close inlet valve / shut off pump
- Relieve pressure (bleed valve or slightly loosen clamp)
- Loosen clamp ring
- Lift lid
- Remove old cartridge
- Insert new cartridge (check gasket seated)
- Close lid, secure clamp
- Repressurize, check for leaks
- Pressure drop: Install gauges before and after housing. When differential reaches 2-3 bar, change cartridge
- Flow drop: Same pump setting but noticeably less output indicates loaded cartridge
RELATED PRODUCTS
10inch 133mm Stainless Steel Filter Housing with High-Pressure Resistance and Clamp Closure Design for Water Treatment
Industrial stainless steel filter housing with clamp closure for quick cartridge swaps without pipe disconnection. SS304/316L construction, 0.1-1.0Mpa pressure rating, 5-10 year service life. Accepts standard cartridges (1-100μm) for water treatment, chemical, food & pharmaceutical applications. OEM available.
20"X4.5" Industrial High Working Pressure 2mm Thickness Stainless Steel Housing Clamp Opening Liquid Treatment Water Prefilter
PRODUCT HIGHLIGHTS Clamp Closure Design: Features a quick-opening clamp ring (often a wing-nut or T-bolt clamp) instead of traditional flange bolts. No Pipe Disconnection: The top-load design allows you to open the clamp and lift out the cartridge without unbolting the housing or disconnecting inlet...
20inch 304 Stainless Steel Home Pre-filter with Clamp Closure Design and High-Pressure Resistance for Sediment Filtration
20-inch stainless steel whole house water filter housing with clamp closure design for quick cartridge replacement without pipe disconnection. Features 304 stainless steel construction, 40-micron filtration, 5000-8000L/H flow rate, and 5-10 year service life. Suitable for home, office, and industrial applications.
30inch 133 Jumbo Housing Top Load Cartridge Home Pre-filter with Clamp Closure for Fast Replacement Without Pipe Disconnection
SS304 jumbo housing handles 15000-20000L/H at 5-100 microns with 5-10 year service life. Clamp closure enables fast cartridge swaps without pipe disconnection, cutting downtime and labor costs. OEM options available.
