20"X4.5" Industrial High Working Pressure 2mm Thickness Stainless Steel Housing Clamp Opening Liquid Treatment Water Prefilter
20"X4.5" Industrial High Working Pressure 2mm Thickness Stainless Steel Housing Clamp Opening Liquid Treatment Water Prefilter
Basic Properties
country of origin
China
brand name
Cheero
certificate
ce
product model
PF20JB-01
Trading Properties
moq
10 pieces
unit price
$85-92.50 / piece
Product Summary
PRODUCT HIGHLIGHTS Clamp Closure Design: Features a quick-opening clamp ring (often a wing-nut or T-bolt clamp) instead of traditional flange bolts. No Pipe Disconnection: The top-load design allows you to open the clamp and lift out the cartridge without unbolting the housing or disconnecting inlet...
Product Details
filtration accuracy:
1-100 Microns
Flow Rate:
10000L/H-15000L/H
packaging types:
Corrugated Box
Housing Material:
304 Stainless Steel
Size:
Dia 133 X 705mm
Application:
Home / Office/ Industrial
OEM:
Available
Filter Material:
Stainless Steel Mesh
Service life:
5-10 Years
Water Pressure:
0.1-1.0Mpa
Product Description
PRODUCT HIGHLIGHTS
- Clamp Closure Design: Features a quick-opening clamp ring (often a wing-nut or T-bolt clamp) instead of traditional flange bolts.
- No Pipe Disconnection: The top-load design allows you to open the clamp and lift out the cartridge without unbolting the housing or disconnecting inlet/outlet piping.
- Reduced Downtime: Maintenance takes minutes instead of hours. Keep your process running with minimal interruption.
- SS304/SS316L Stainless Steel Housing: Corrosion-resistant, robust, and rated for high-pressure industrial environments. SS316Lis available for marine or aggressive chemical applications.
- High-Pressure Resistance: Clamp design provides a secure, leak-free seal even under high differential pressure. Handles demanding process conditions better than plastic equivalents.
- Sanitary Finish (Optional): Available with food-grade or pharmaceutical polish (Ra ≤ 0.8μm / Ra ≤ 0.4μm) for high-purity applications.
- Universal Cartridge Fit: Accepts standard DOE (Double Open End) or SOE(Single Open End, 222/226 fin) filter cartridges-PP melt-blown, string wound, pleated, or membrane.
- Multi-Micron Capability: Use 1μm to 100μm cartridges depending on your stage. Start coarse for Pre-filtration, swap to fine for final polish - same housing.
- Wide Application Range: Water treatment/ro Pre-Filtration, Chemical processing & plating, Food & beverage / edible oil ,Pharmaceutical & cosmetic: Paints, inks, and solvents
- Reusable Permanent Housing: Buy once, replace only the low-cost internal cartridge. Much cheaper long-term than disposable whole-unit filters.
- Lower Labor Cost: Quick-change clamp design means your operator-not a maintenance crew - can handle filter swaps. No flange breaking, no pipe realignment.
- Compact Footprint: Single cartridge design saves space in skids, small plants, or point-of-use installations.
FAQsWhat is a clamp-type single cartridge filter?
It's a filter housing that holds one cartridge and uses a quick-opening clamp ring to secure the lid - instead of multiple bolts or flanges. Loosen one clamp, lift the lid, swap the cartridge. No pipe disconnection, no tools, no downtime.
What sizes are available?
Standard cartridge lengths: 10", 20"and 30". All use 4.5" OD standard cartridges. Housing is sized accordingly - the longer the cartridge, the more surface area, the longer the service life and the higher the flow capacity.
How do I choose the right length?
* you can choose the model base on the real flow you need, normally 10" housing: 6000L-10000L/H, 20" housing:10000L-15000L/H, 30" housing: 15000L-20000L/H
What connection types are available?
Threaded (BSP/NPT) : 1" ,,1.5" and 2", most common for industrial piping
What cartridges can I use?
Any standard 4.5" OD cartridge : PP melt-blown, string wound, pleated, carbon block, membrane. DOE or SOE (222/226 fin). You're not locked to our brand; any standard cartridge fits. This keeps your ongoing consumable cost low and flexible.
How do I change the cartridge?
1. Close inlet valve / shut off pump 2. Relieve pressure (bleed valve or slightly loosen clamp) 3. Loosen clamp ring 4. Lift lid 5. Remove old cartridge 6. Insert new cartridge (check gasket seated) 7. Close lid, secure clamp 8. Repressurize, check for leaks
How do I know when to replace the cartridge?
* Pressure drop: Install a gauge before and after the housing. When differential reaches 2-3 bar, change the cartridge * Flow drop : Same pump setting but noticeably less output = cartridge loaded
RELATED PRODUCTS
10inch 133mm Stainless Steel Filter Housing with High-Pressure Resistance and Clamp Closure Design for Water Treatment
Industrial stainless steel filter housing with clamp closure for quick cartridge swaps without pipe disconnection. SS304/316L construction, 0.1-1.0Mpa pressure rating, 5-10 year service life. Accepts standard cartridges (1-100μm) for water treatment, chemical, food & pharmaceutical applications. OEM available.
20inch 304 Stainless Steel Home Pre-filter with Clamp Closure Design and High-Pressure Resistance for Sediment Filtration
20-inch stainless steel whole house water filter housing with clamp closure design for quick cartridge replacement without pipe disconnection. Features 304 stainless steel construction, 40-micron filtration, 5000-8000L/H flow rate, and 5-10 year service life. Suitable for home, office, and industrial applications.
30inch 133 Jumbo Housing Top Load Cartridge Home Pre-filter with Clamp Closure for Fast Replacement Without Pipe Disconnection
SS304 jumbo housing handles 15000-20000L/H at 5-100 microns with 5-10 year service life. Clamp closure enables fast cartridge swaps without pipe disconnection, cutting downtime and labor costs. OEM options available.
Stainless Steel Filter Housing Whole House Water Treatment Appliance 20"x4.5" Composite PP + Carbon Filter Outdoor Water Prefilter
PRODUCT HIGHLIGHTS Clamp Closure Design: Features a quick-opening clamp ring (often a wing-nut or T-bolt clamp) instead of traditional flanged bolts. No Pipe Disconnection: The top-load design allows you to open the clamp and lift out the cartridge without unbolting the housing or disconnecting ...
