304 Stainless Steel 10 Inch Water Filter Housing with Clamp Closure Design for Easy Maintenance
Basic Properties
Trading Properties
Product Summary
Product Details
304 Stainless Steel Water Filter Housing
,10 Inch Single Cartridge Filter
,Clamp Closure Design Pre-Filter System
Product Description
Stainless Steel Whole House Water Filter Housing 10" X 2.5" Single Core Sediment Water Filter System
Product Highlights
- Clamp Closure Design: Features a quick-opening clamp ring (wing-nut or T-bolt clamp) instead of traditional flange bolts
- No Pipe Disconnection: Top-load design allows cartridge replacement without unbolting housing or disconnecting inlet/outlet piping
- Reduced Downtime: Maintenance takes minutes instead of hours, keeping your process running with minimal interruption
- SS304/SS316L Stainless Steel Housing: Corrosion-resistant, robust construction rated for high-pressure industrial environments
- High-Pressure Resistance: Secure, leak-free seal even under high differential pressure conditions
- Sanitary Finish (Optional): Available with food-grade or pharmaceutical polish for high-purity applications
- Universal Cartridge Fit: Accepts standard DOE (Double Open End) or SOE (Single Open End, 222/226 fin) filter cartridges
- Multi-Micron Capability: Compatible with 1μm to 100μm cartridges for various filtration stages
- Wide Application Range: Suitable for water treatment, chemical processing, food & beverage and more
- Reusable Permanent Housing: Long-term cost savings by replacing only low-cost internal cartridges
- Lower Labor Cost: Quick-change clamp design enables operator-level maintenance without specialized crews
- Compact Footprint: Single cartridge design saves space in skids and small installations
Product Images
Frequently Asked Questions
| Size | Application | Flow Rate |
|---|---|---|
| 5" | Point-of-use, small skids, lab | 1-3 m³/h |
| 10" | Point-of-use, small skids, lab | 3-5 m³/h |
| 20" | General industrial, medium flow | 5-8 m³/h |
Rule of thumb: if you're changing cartridges more than once a month, go one size up. Fewer change-outs = lower labor cost.
- Close inlet valve / shut off pump
- Relieve pressure (bleed valve or slightly loosen clamp)
- Loosen clamp ring
- Lift lid
- Remove old cartridge
- Insert new cartridge (check gasket seated)
- Close lid, secure clamp
- Repressurize, check for leaks
- Pressure drop: Install a gauge before and after the housing. When differential reaches 2-3 bar, change the cartridge
- Flow drop: Same pump setting but noticeably less output = cartridge loaded
RELATED PRODUCTS
10inch 133mm Stainless Steel Filter Housing with High-Pressure Resistance and Clamp Closure Design for Water Treatment
Industrial stainless steel filter housing with clamp closure for quick cartridge swaps without pipe disconnection. SS304/316L construction, 0.1-1.0Mpa pressure rating, 5-10 year service life. Accepts standard cartridges (1-100μm) for water treatment, chemical, food & pharmaceutical applications. OEM available.
20"X4.5" Industrial High Working Pressure 2mm Thickness Stainless Steel Housing Clamp Opening Liquid Treatment Water Prefilter
PRODUCT HIGHLIGHTS Clamp Closure Design: Features a quick-opening clamp ring (often a wing-nut or T-bolt clamp) instead of traditional flange bolts. No Pipe Disconnection: The top-load design allows you to open the clamp and lift out the cartridge without unbolting the housing or disconnecting inlet...
20inch 304 Stainless Steel Home Pre-filter with Clamp Closure Design and High-Pressure Resistance for Sediment Filtration
20-inch stainless steel whole house water filter housing with clamp closure design for quick cartridge replacement without pipe disconnection. Features 304 stainless steel construction, 40-micron filtration, 5000-8000L/H flow rate, and 5-10 year service life. Suitable for home, office, and industrial applications.
30inch 133 Jumbo Housing Top Load Cartridge Home Pre-filter with Clamp Closure for Fast Replacement Without Pipe Disconnection
SS304 jumbo housing handles 15000-20000L/H at 5-100 microns with 5-10 year service life. Clamp closure enables fast cartridge swaps without pipe disconnection, cutting downtime and labor costs. OEM options available.
